#UNIBOX MAC UPDATE#
#UNIBOX MAC MAC#

Clients will have to enter the SSID manually to connect to the AP.Ĭheck this option to enable WPA2 security key.Įnter 8 characters or longer key for securing the network. If checked, the AP will not advertise the SSID. On ticking-off the checkbox, the data needed to set the SSID will be captured. It is important that all APs must be on the same frequency band for meshing to work. Generally recommended for dual or higher band radios. A wireless mesh network (WMN) is a mesh network created through the connection of wireless access points installed in each network user's locale. To enable WiFi meshing, check the mesh option. Select the desired bandwidth (only in case of 5Ghz) AP will refuse additional device once this limit is reached Set transmit power for the selected frequency band in DBm.Įnter the maximum number of clients that can connect on the selected band. If the Auto option is selected, the AP will automatically decide the best channel for operating. Set the channel for operating the given radio. If the AP has 5 GHz radio, select this option. If the AP has 2.4 GHz radio, select this option. The available channels will change based on the selected country. Select the country in which your AP is located.

#UNIBOX MAC MAC#

To change the MAC address, you need to delete and re-add the AP.Įnter the latitude and longitude of the AP or select from the google map.Ĭheck this box for overriding the default configuration with the AP's configuration The edit AP configuration allows the administrator to edit the different subsections in the AP section.The edit AP configuration is sectioned into four sub-sections:Įnter the MAC address of the access point. The last column, i.e., the ‘Operation’ column, allows an admin to configure or delete the AP from the management. It also displays the status and the network name of the AP. The table also displays the number of clients connected to each AP along with the channel information for both 2.4 and 5 GHz radios. The name of the AP, private IP and MAC address of the AP are also displayed. The first column displays the model of the AP being managed. This page displays the list of CloudMax access points that are provisioned for central managementĮach line displays the AP information along with the current status of the AP The AP will get all the settings applied to the global configuration.Īfter that go to the edit configuration and edit the access point information. Select the configuration to apply to the AP. The fields marked with asterisk ( *) are mandatoryĮnter the MAC address of LAN port of the access point. A model form will be displayed that collects the information required to create a new AP. Now add the AP just clicking on checkbox and ‘+’ option.Ĭlick on the ‘+’ icon. Unibox will automatically discover the AP. Step 10 - Now go to the wireless section in unibox and Click on manage APĬlick on auto discover AP(Search symbol). Step 9 - Click on status option and check the status of WAN (Internet) Step 8 - After submitting the details below screen will appear.

#UNIBOX MAC UPDATE#

Step 7 - Now click on network option and update WAN configuration.(Select any one option and submit the details.) Step 5 - Login using default credentials, Step 4 - Now go the browser and take the access of AP using default IP address 192.168.10.1 The CloudMax AP is reset to default settings. Hold the Reset button for 10 seconds, and leave. Keep the Reset button pressed, and power on the CloudMax AP. Step 3 - Press and hold the Reset button, and power off the CloudMax AP. Step 2 - Connect one end of the Ethernet cable to your internet (Unibox lan port), and the other end to the adaptor port named as LAN. Step 1 - Connect one end of the Ethernet Cable to the adaptor port named as PoE, and connect the other end of the Ethernet cable to the WAN port of CloudMax AP.

Unibox mac